Shielding ORMUS

 

Jim noticed early on that ORMUS like to "hide out" in tight spaces. I can cite dozens of examples that support this. In my lectures I give several examples of how Jim's very high energy ORMUS "hid out" in various carbon based substances. These examples include Jim's hands, gasoline, auto paint, charcoal briquettes and auto grease. In each of these examples the ORMUS "dropped" to metal. I personally saw the metal fibers coming out of the backs of Jim's hands. I also saw the metal fibers in charcoal briquettes.

 

David Hudson, in at least one of his lectures, said that proper levels of salt would keep ORMUS from evaporating with the water in a distillation process. Jim also noticed this as did I when I first discovered and wrote about the peroxide method ten years ago this month.

 

Based on our observations around this time, Jim and I began to discuss the possibility that ORMUS was hiding out inside of water molecules or carbon based molecules and that salt gave added protection to the ORMUS from magnetic fields.

 

Remember that Jim's original experiences with ozonated ORMUS suggested that his ORMUS material was VERY energetic. Based on his experiences we postulated that this very high energy level makes it more prone to "teleportation" (or Josephson tunneling) and also made it more likely to drop to metal when exposed to carbon, nitrates and sulfites as Hudson suggested in his lectures.

 

When Jim got his hands in the ozone treated mine waste water he had gold fibers come out of the backs of his hands. He also was found to have four times the lethal levels of lead and arsenic in his body, a few weeks later, when he finally saw a doctor. This raises the question: "how did these huge levels of lead, arsenic and gold get into Jim's hands with just a few seconds of exposure to the mine waste water?"

 

David Hudson claimed in his lectures that he had made ORMUS mercury. Jim claimed a few years ago that he has made ORMUS lead. Alchemists have claimed that there is an alchemical form of arsenic. Based on these claims and on the observations of more recent experiments where other ORMUS experimenters claim to have made ORMUS forms of twelve additional elements that Hudson never claimed had an ORMUS form, we can postulate that the lead and arsenic in Jim's body teleported into his hands in it's highest energy ORMUS form and dropped to metal when exposed to the carbon, nitrates and/or sulfites in his body.

 

This suggests that the factors involved are quite complex. That is why I used the fairly generic phrase:

 

David Hudson and others have suggested that certain substances can "pin" the ORMUS elements to their metallic state under some circumstances.

 

Describing the intricacies of these circumstances was beyond the scope of the overview document that the quote was extracted from.

 

I have not previously written about the main reason that I have been suggesting the use of shielded containers for the past six or seven years.

 

In 1999-2000 Jim developed a new method for extracting ORMUS from rock source material. This method was partly based on my peroxide method but included additional chemical processes. Jim called his rock source material "hot rocks" because he found that they had very high levels of the ORMUS materials in them. A couple years later I posted this method to an ORMUS forum but changed the name to the HR Method since the term "hot rocks" can have undesirable interpretations. You can read this method at:

 

http://www.OrmusMinerals.com/hr.htm

 

The HR method did not use high energy ozone but, as we found out later, it produced materials with some similar properties to the material that Jim got his hands in back in 1989.

 

Here I think it might be helpful to explain a bit more about some under reported results of Jim's exposure to the high energy ORMUS back in 1989. From the time of that exposure to the present Jim has claimed that he can see and smell ORMUS in the air. This ability gave Jim instant feedback when he was working with the ORMUS rich materials from the ozone method, the HR method and the magnetic traps.

Jim did not have to convert to metal and send something off for assay to determine if ORMUS were in his material. When we were driving up to visit the Essene in August of 1999 we passed a stream a few hundred yards from the road and Jim said that he smelled the ORMUS from the stream. He felt that it would be a good source to test but we did not stop.

 

When Jim was first making ORMUS from metal using ozone in 1996, he would sometimes drive samples from Portland to Baker City. He said that every time he drove under the high voltage power lines from the hydropower dams on the Columbia River that he would see and smell ORMUS gassing off into the air from his samples. As a result of this and other experiences he started putting the samples in cheap steel containers to give them a bit of magnetic shielding.

 

I sometimes bought steel containers at yard sales and thrift stores for Jim to use for storing ORMUS. He especially liked the nested containers and suggested that alternating steel and aluminum with plastic bags between seemed to best keep the ORMUS from gassing off.

 

You can see some of these steel containers at:

 

http://www.OrmusMinerals.com/magshield.jpg

 

For shielding at his "lab" in Portland he used the cheap steel file cabinet illustrated at:

 

http://www.OrmusMinerals.com/resonance.htm

 

Each ORMUS container was kept in this file cabinet but was also inside a steel coffee can with an inch or so of salt in the bottom. Jim also kept some aluminum oxide desiccant beads and some mineral oil in sealed containers inside this file cabinet so that any ORMUS gas that escaped its sealed containers could find refuge by "hiding" in the desiccant beads or the mineral oil.

 

You can see some of this presumed ORMUS material in a picture of the mineral oil at:

 

http://www.OrmusMinerals.com/mineraloil.jpg

 

In 2000 I was contacted by an American research scientist with contacts in Taiwan. This scientist arranged with me to meet Jim and Jim later agreed to send some of his HR material to Taiwan for testing. Before sending it to Taiwan we sent some samples to this scientist on the east coast to see how well various shipping schemes worked. Here is an excerpt from an email to this scientist about the various shielding schemes we tried:

 

We sent off the HR today. On Friday morning you should be getting 3 packages. One will have a large porcelain coated canner which contains four gallon water bottles filled with the HR liquid with the metals still in it. These should be at about pH 6. These bottles are wrapped in aluminum foil and then in a heavy trash compactor bag. When you open the container be sure that you check for any moisture which might have leaked out and check to see if you can figure out which bottle(s) it might have leaked from. The lids of all of the bottles are taped on with electrician's tape.

 

The second box will contain the samples which are labeled and packed in several layers of steel or foil.

 

The third box will contain two metal tins. The small tin contains a quart of clear HR which has been pH adjusted to between 5 and 6. The large tin contains three additional bottles. One of these bottles contains HR which is still at pH 12+. This bottle is inside an additional tin. Both of the other bottles are between pH 5 and 6. All of these bottles are wrapped in foil and trash bags as described above. Please open each bottle carefully and examine the inside of the associated trash bag and foil for evidence of moisture. We expect to see some differences between these different packaging and pH regimes.

 

We did not use glass bottles. All of the bottles we used were made of HDPE plastic.

Despite the care we took in packing the HR samples, when we shipped the HR to Taiwan it tested as having toxic levels of metallic nickel and arsenic though testing before it was shipped did not show any metallic arsenic present and showed very low levels of metallic nickel. My guess is that ORMUS arsenic and nickel was present in the original material and that x-ray examination on entering Taiwan triggered the ORMUS arsenic and nickel into converting to the toxic metallic form.

 

I want to emphasize again that the only difference between the material before it was shipped and the material after it reached Taiwan was the conditions that it was exposed to in shipping. I think it was shipped by air and this might have exposed the HR to increased cosmic radiation as well.

 

Here is something I wrote in November of 2000 in response to an email informing me of the arsenic problem with the material that was shipped to Taiwan:

 

We continue to have good luck with it. At this point, Jim has had it tested several times and has never found arsenic in any assay. While the nickel levels were high in the original samples, the latest product has them down to a few parts per million.

 

It seems apparent that something is going on here which is related to shipping. Jim sent a sample to Texas and it was returned because the person died before the sample got there. Jim's observations of this sample were that it was significantly different than a sample from the same batch which did not travel. We are looking into the possibility of producing this stuff on site.

As you can see from these stories, there are some fairly complex interactions that appear to bring about the conversion of ORMUS to metal.

 

Hudson said that ORMUS could be "pinned" to a lower energy state by high energy radiation and exposure to certain chemicals. Here is one of his comments on this from his first public lecture in Virginia Beach:

 

We have this all dispersed through our bodies, basically it is all affected, but it is inside our body, and all we see is the field. As our body is filled with this, and the light density increases, within our body. Eventually you get to the point where literally the field cannot get inside of it and it is literally on the outside of us and so, inside we exist within this envelope of light, okay. We have this physical body inside but literally the pure Meissner field is around our body. It keeps the external magnetic fields out the all radiation, ultra violet radiation, all of this can't get in.

It might be interesting for people to understand that there are materials that can kill these atoms. This is important. I skipped over it in my hurry. The elements are basically carbon, and carbon monoxide, sulphites, So3, nitrogen oxide and short wave-length ultraviolet light, or shorter. Those are the four main things that kill this material in the body.

 

Unfortunately you can't not breathe. And the day you took your first breath of air one percent of the air in your body was nitrous oxide and so the rhodium and iridium in your body is literally going out. Every breath of air some of these atoms stop doing what they are supposed to be doing, you are dying. You went through your teen years, your early twenties and then it just kind of went down hill from there. Literally, the light of life is going out in our bodies. Part of life.

Hudson did not say the ORMUS was pinned to metal, just that it was dropped into a low spin state (which may be more prone to dropping to metal). Here is a quote about this from Hudson's Tampa workshop:

 

1:47:35 - I've found that there are four substances that pin these high spin atoms and take them back to the low spin state. Those substances are sulfites (SO3), carbon and carbon monoxide, nitric oxide, and short wavelength radiation (deep ultraviolet or shorter). That's what caused this stuff to explode in sunlight, I found out later.   So there are four major things which cause this to go back to the low spin state. So, actually, in your body there are four things which cause this to go back to the low spin state. So that in your body it kills the light. It causes them to go back to the low spin state.

 

1:48:15 - I will say that when nitric oxide interreacts with these elements, taking them back to the low spin state, that it does involve a phenomenon called electron annihilation. And the actual nitric oxides instead of being nitrogen 14 becomes radioactive carbon 14 when that occurs. So that in your body, when dying you are producing radioactive carbon 14. It gets in your body a different way than they tell you it does.

The early stages of any new science can be fairly confusing until enough data has been collected to form some hypotheses and to start getting some confirmation of those hypotheses. I think we might have this all fairly well formalized in fifty or sixty years. I take ORMUS so that I can have a better expectation of still being here at that time.