Daniel's MethodThis is the method that I discovered in the recent past. We have discussed the potential difference between the different m-state materials. Some have said that they are bound up in a chlorine ring. Some say that it is a sodium ring. Hudson has called these substances monoatomic whereas Gary and Jerel have explained that they are most likely diatomic. Having said that, if the substances that I am producing with my method are indeed the ORMEs/m-state/diatomic substances (for I have no instrumentation to verify whether they are or not) then we gain:
- A better insight into understanding the alchemical nature of the ORMEs/m-state/diatomic/AuM substances. (I will use the term ORMEs for the remainder of the document)
- A way of producing the ORMEs that is free of ANY toxic elements.
- A way of producing ORMEs that does not require the use of any acid or base.
- A way that ensures the ORMEs substance that is being obtained, whether it is silver, gold, etc. is from an absolutely PURE source or silver, gold, etc.
- A way of creating ORMEs gold, silver, platinum, rhodium, iridium, copper, and all the platinum group elements freely.
- It is the simplest method requiring the fewest steps.
Materials:
- Distilled water
- 1 empty bottle with cap ~350 ml (eg. Fruit juice bottle or iced tea, etc.)
- 1 400 ml beaker (suggested size. It can be smaller or larger)
- Sodium Chloride (the purer the better)
- Ammeter is suggested. Not necessary as I will provide guidelines for saturated NaCl salt solution quantities to yield approximate amperage.
- Several alligator clips
- Homeopathic remedy of whichever ORMEs you wish to produce. This could be any one of the following:
Iridium metallicum Rhodium metallicum Platina (platinum) Aurum metallicum (gold) Argentum metallicum (silver) Cuprum metallicum (copper) Paladium metallicum
- Electrical setup: I feel this is quite flexible. You have 2 variables: Voltage and Amperage.
a) The voltage can be anything from 6V to 48V. I am currently using 2 - 12 V AC adaptors. I have also used only one and I have had equal success. Understand that with lower voltage one is required to put in more salt to lower resistance to yield the same current. b) Two electrodes. I am currently using the electrodes that I had made for Jerel's method viz. 2 - ΒΌ ounce pure gold electrodes. I feel this might not be necessary although the gold ensures purity and it is the most non-reactive substance. Titanium can be used to experiment, as well as other metals that do not react with NaCl while a current is being run through them.
Here is my little setup. Not the best shot, but you get an idea as to how it looks.
Procedures:We will be using Aurum metallicum (Gold) as an example of a homeopathic Remedy. The dilution of this example will be 10 M. viz 10,000 dilutions. (As a note: Studies show that at the 9th dilution there are no more molecules present in solution)
- Step a) Make a saturated solution of NaCl in pure distilled water.
- Step b) Potentization: Take the empty fruit juice bottle and fill it up with distilled water. Make sure all the glassware is very clean as little bits of dirt will clump up the solution. Add several little sugar granules of the remedy into the water solution. Note: 1 sugar granule is sufficient, but you can add more to ensure a good potentization. 10 is not necessary. Put the cap tightly on the bottle and shake vigorously for a few seconds. (Do this quickly so that the sugar does not dissolve in the water).
- Step c) Pour your potentized water into the 400 ml beaker making sure that the sugar granules do not pour over.
- Step d) Place the electrodes into the beaker. If you have not done Jerel's method, you can do the following: Construct a setup so that the electrodes are pointing straight down into the beaker and spread approximately 90% of the beaker's diameter. This is not critical. The electrodes could be 50% of the beaker's diameter apart. Your electrical supply is attached to your electrodes by alligator clips. Make sure the alligator clips do not enter into the water or come in contact with it.
- Step e) If you are using an ammeter, hook it up now (in series). Start up the current. No bubbles should be forming at this point since the water is pure and very resistant. Drip in a few drops of saturated NaCl solution until the current rises to 5 mA. It usually takes ~20-25 drops. I believe there is a time relationship between current and final results. The higher the current, the faster the solution flashes into colour. I like to work with a very low current. Even lower than 5 mA. It takes ~8 drops to start getting the bubbles forming on the electrodes, this corresponds to ~ 1mA. The colours come out purer and there is less chance of letting it cook too long when the current is very low.
- Step f) Wait.
I find that it takes a different amount of time for this to come to completion depending on the remedy and the dilution. Gold takes around 4 hours on 5 mA and at the 10M dilution. This number will vary depending on what has been modified. Record the current you are using, as well as the homeopathic dilution.
There is a lot of experimenting to do with the variable of dilution. Also with current. I have found that even with the lower dilutions eg 9 CH or 30 CH, this process will work although I enjoy using a 10M knowing how powerful the energy of the substance is at that incredible dilution. Many alchemists speak of dilutions and making the substance more powerful once you have it. It is possible that the higher dilutions will create a more powerful substance, but I feel that the dilution does not change the final result in this case. Viz using a 10M or a 30 CH yields the same result. I am not certain of this.
Expected results:Within several hours the solution should be an incredibly beautiful colour. Gold: Dark Red. If you shine a thin light through it, the light where it first makes contact with the solution will have a greenish yellow tinge to it. I find the rest of the solution looks cherry red, like punch, yet it looks muddy when looking at it without the thin light. I also see purple inside of the red. It hides sometimes, but it is there. Gold is the muddiest of the substances that I have made. There is a point where it is not muddy. An hour or two before it starts to turn muddy, it will be a glorious cherry red and clear. I am not sure which result is most desired. Based on my experience with Jerel's method, when it is a little muddy it looks identical to what I was creating with Jerel's method. Others who have tried Jerel's method can compare themselves. Silver is more pink than the gold. I would call it dark pink with a reddish tinge. Platinum is light pink "Like silver". It looks like silver, but it is softer and lighter. Rhodium: Is a dark purple. Iridium: Is a dark blackish-blue colour. Very nice colour. The others: ???
Top from left: Gold, iridium, rhodium Bottom: silver, platinum
Left to right: gold, iridium, silver, platinum, rhodium
Also worthy of mention is the finding that after a day or so, the solutions have an oil that swims up on the surface of the water. The oil looks just like the slick of an oil spill in a puddle. It has all colours within it. This is confirmation for me that these substances are indeed powerful and/or at least in the right direction. There is nowhere that the oil can come from in a chemical sense. The starting materials are distilled water, salt, and a remedy. I feel this is what Artephius refers to as: "The oil swimming on the water". Platinum, gold, rhodium, iridium and silver all have this oil.
Discussion:This technique is very exciting. It yields incredibly beautiful colours. It is possible to prepare the water in the beginning with 2 or more remedies and then see what it will look like when they are "brought down" altogether. It is also perfectly non-toxic. No acid or base is required.
Something else that is very exciting is the fact that when you let the solution run too long, you will begin to get the physical substance forming in the beaker. I have seen half of the inner side of the beaker coated with a paint-like layer of gold metal. It was so shiny I could see myself grinning in the reflection. I once ran the rhodium for too long and there were dark clumps in the bottom. I could not tell if this was rhodium metal as I have never seen the metal before. It is possible to yield small flakes of metal as well when you exceed the proper time. I suggest to stop running the current before any signs of clumps or flakes start to appear. If a thin layer of gold or silver etc. starts to form on the side of the beaker, then stop.
(note: i am still not sure if these metals that are coming "out of nowhere" are from the remedy being brought down from the spiritual into the physical or from the gold coming off of the electrodes.)
With this method it is possible to take a remedy that has been diluted 10,000 times, like gold, and to obtain gold metal in the solution. (provided that we are believing that it is from the ether and not from the gold electrodes) The implications of this are vast. It lends a lot of credibility to the homeopathic philosophy of high dilutions. It reveals the fact that the substance is still being stored within the water/alcohol, even when it is not detectable by our current scientific instrumentation. All of the "scientists" who have ignorantly called homeopathy a farce can now chew on their hats.
Note: I ran the entire setup with gold electrodes and salt only viz with no remedy, for 24 hours and the solution was clean as a whistle. I have tried this several times because I have had trouble believing that this method is for real. Yet if I run the whole setup with no remedy, nothing is yielded. If all that is changed is the addition of a dilution of gold at the 10,000th dilution, the red wine is obtained. This indicates that the remedy is causing the colouring of the solution.
I am assuming here that the metal that is obtained when one runs this setup for too long is also due to the remedy and not due to the gold electrodes that I am using. It would a good idea to weigh the electrodes and run this ten times trying to yield a lot of gold metal, and then comparing the final weight to see if there is a loss. Or one can use a different material for the electrodes. I feel that the electrodes are merely acting as a conduction device. What also supports this argument is the fact that different remedies yield different coloured solutions.
With the assumption that the electrodes are merely acting as conductors and are not reacting, I feel this experiment helps us to see into the nature of the ORMEs substances. Matter can exist in different forms. Let's use the example of the substance: Gold; Au
Physical: Gold in metallic form- directly detectable by our means today. Spiritual: Gold in homeopathic dilution- directly undetectable by our means today. The spiritual form is purely energetic. It must be stored within a physical substance, like water or alcohol, that can carry the vibrational imprint of the material. As the dilutions increase, the gold becomes more and more spiritual and less and less physical. (as an aside: I have a hypothesis that says at some point the vibration of the remedy will be so strong (for eg at 1 zillion dilutions) that it will fold over into itself and implode back into its physical form. I am using the vedic knowledge of the Cosmic egg as a basis for this hypothesis. Believe it or not, but there are remedies that exist that are MMM. 1000*1000*1000 dilutions (1 billion dilutions)
In between Physical and Spiritual: AKA Gold ORMEs. This is directly detectable but is more difficult (recall Hudson's 17 years trying to find what this stuff was). It exists in a state of matter that is both spiritual and physical, or that is between the physical and spiritual. How do we know this?
When you take the substance from the spiritual form down toward the physical form, at some point in between, there is a state where it comes back into the physical world. If you then continue to electrify it, the gold will eventually become metal again. It makes a lot of sense to say that these ORMEs are between the physical and the spiritual since we have heard them referred to as the bridge between heaven and earth. Any substance that is capable of bringing the consumer toward a state of grace must be both physical and spiritual. Interestingly, the gold has a colour of red with purple in it; each end of the colour spectrum as well as the base chakra colour and the crown/third-eye colours.
Based on the experiments, it appears as if certain remedies will come down into the solution quicker than others. Eg platinum takes longer than rhodium.
There is also a inverse relationship between the # of dilutions of a remedy and the time it takes to come down into solution viz. to begin to change the colour of the solution. Eg a 10,000 will take longer than a 30.
Energetic effects: There is a lot to be assessed with the substances produced by these methods. I have felt a reaction to drinking all of these substances. Each person, depending on their level of vitality and their level of awareness, will feel differently from ingesting these materials. Start off with a few mls once or twice a day. You can increase until you begin to feel something from the substances. My feeling is that the gold brings the ability to connect with knowledge of a very high order. There are many other factors at play here and many variables, which i feel i must mention, so it is not a scientific thing to say definitively that these substances bring a higher order of knowledge. I feel this is true though.
It is my joy to share this method. There is much more to be discovered.
Love and Light daniel
|