M-state Quantum Blender

There is a blender with water.

At the bottom of water there is a speaker magnet.

There is a vortex.

There is a Tesla AC induction coil ( with variable frequency control).

There are two gold rods touching the water vortex at run time with the tips just on the edge of the vortex.

There is a cone of oil filter fibers at the top under the cover.

Run the blender, control the frequency of the alternating corona, collect m-gold from the upper cone.

The High Voltage generated, that is needed, depends on the air/water gap. The corona discharge should follow the circular vortex. In doing so, Ozone is produced and hydrogen aurate is produced and m-gold separates from hydrogen inside the corona. Recombination of hydrogen-ozone forming water at the corona energy ring is common.

The High Voltage has the power to deposit Gold on gold, but the presence of water and the AC not DC in combination with the magnetic field present is just the perfect environment for m-gold production.

The secret of the frequency is untold. The frequency plays the role of a fisherman. Gold leaves the rod In a negative state but before it reaches the other rod "mechanically" we reverse the direction so another one in the reverse direction starts migration. If the frequency is resonant with the dimensions of the vortex and the gap! then m-gold production is visible in real time swirling up to the filter cone.

The vortex should be anti-clockwise looking in the direction of the force of gravity.

The gold rod diameter could be 3mm to 3 cm.

The rods should have rounded ends (spherical). The rod tip could be biased in the direction of the vortex but the best shape is spherical tip.

Air gaps should not be less than 5 cm but for 10kv even 1cm is ok.

The experimental range of the gap between rods is from 3 mm to 5 cm

The experimental range of the voltage is between 10 kV and 100 kV.

The AC frequency of the corona discharge should be resonant with the vortex rps.